MimioBoard Touch Board and MimioDisplay Touch Display
User Guide and Drivers

User Guides

Download our helpful user guide for:
The MimioBoard™ touch board, here.>>
The MimioDisplay™ touch display, here.>>

Drivers

You need to install the drivers to be able to calibrate and use Touch on Mac, Linux, and Windows XP operating systems. For Windows 7 or later, you can use the built-in Calibrate feature under Tablet PC Settings. Please note: If the screen resolution of the computers fits the device, there is usually no need for calibration. However, if you have to calibrate, please follow the instructions below.

Windows 7 and Later

Connect the USB interactive cable and you should be able to use the device with six touch inputs.

To Calibrate

  • Go to the Control Panel.
  • Search for Tablet PC Settings. (Note: You need to have USB interactive cable plugged in to find these settings.)
  • Choose Calibrate button.
  • Use Reset button to undo previous Calibration settings, if any.
  • Touch the center of the Calibration Target as it appears across the screen.
  • Choose ‘Yes’ to Save the calibration data.

Windows XP

Please run TouchWinSetup4.0.7.25.exe and follow the on-screen instructions. Once the installation is complete, you will be prompted to restart. Connect the interactive USB cable and you should be able to use the device with single touch input.

To Calibrate

  • Launch TouchWin Configuration application from Start>Programs>MultiTouchWin>TouchWin
  • Choose Calibrate button.
  • Touch the center of the Calibration Target as it appears across the screen.
  • Save the Calibration settings by choosing Done.

Mac

Please run TouchScreenSetup[3.3.7.17].pkg and follow the on-screen instructions. Once the installation is complete, you will be prompted to restart. Connect the interactive USB cable and you should be able to use the device with single touch input.

To Calibrate

  • Launch TouchScreen app from Applications.
  • Choose Calibrate button.
  • Touch the center of the Calibration Target as it appears across the screen.
  • Save the Calibration settings by choosing Done.

Linux

Please install the Calibrate Touchscreen application from ‘All Applications.’

To Calibrate and Use Touchscreen

  • Run Calibrate Touchscreen application.
  • Touch the center of the Calibration Target as it appears across the screen.
  • Upon successful calibration, you should be able to use the device with single touch input.